Foam & Spume
9,08 €
ΚΑΤΑΣΚΕΥΑΣΤΗΣ
NOCH
SKU
NC60862
30 ml
Details Foam & Spume
It Flows, Bubbles and Whooshes: Water in Motion!
Water structuring is one of the most sophisticated topics in model landscaping. To enable you to easily and quickly achieve the best results, NOCH have developed three new water products. The improvements and innovations are in the details: all three new items are completely (real) water-based!
This is not only good for the environment, but also enables you to work on every surface, even polystyrene. Just clean the tool with water after use.
Each breaking wave, each whooshing creek and each waterfall rushing down into a mountain lake creates white spume beside the wave. To reconstruct the wonderful highlights on the waves, NOCH »Foam & Spume« has been developed. The fine material can be carefully applied with a brush on appropriate water spots. It gives rapids, cascades and waves the finishing realistic touch. »Foam & Spume« appears more natural because it is not a white colour.
How-to-tip Foam & Spume
Water structuring is the biggest challenge in model landscaping. With NOCH products you have always a professional, yet the simplest possible solution at hand.
Colour lakes, rivers and creeks with NOCH Riverbed Color Set (ref. 60875) before starting to structure the water. Your colouring should become darker from the outside to the inside, as water appears darker with increasing depth. Fix small stones and sand on the shore surface to enhance this effect.
The new NOCH Artificial Water can be filled with one cast into the lake bed. The bottle contains 500 ml. If you calculate a filling level of 10 mm, the water may be used for 500 cm². This corresponds to a surface of about 25 x 20 cm. At a filling level of 10 mm, it takes approximately 48 hours to harden. 50% of volume is lost, so the water level will be 5 mm at the end.
»Waves & Billows is a great new water product, with which you can finally form higher waves.
The material is used with a spatula from the can and applied roughly on the dried water surface. After drying for about half an hour, it is hardy enough to design a higher surge. Model wonderful waves and water forms with a toothpick or a small spatula.
The well-known NOCH Water Effects (ref. 60872) are perfect for designing (for example) waterfalls or a gently sloping and rippled water surface. The sea is never completely silent: Usually a wind or breeze moves the surface and brings “life” into the water!
The white spume often sets the crowning final of waves and rapids. NOCH »Foam & Spume« has been especially developed to recreate this great effect in model form. Apply »Foam & Spume« directly on the desired water spot with the user-friendly bottle and model it with a fine brush. A perfect finish for every water project!
It Flows, Bubbles and Whooshes: Water in Motion!
Water structuring is one of the most sophisticated topics in model landscaping. To enable you to easily and quickly achieve the best results, NOCH have developed three new water products. The improvements and innovations are in the details: all three new items are completely (real) water-based!
This is not only good for the environment, but also enables you to work on every surface, even polystyrene. Just clean the tool with water after use.
Each breaking wave, each whooshing creek and each waterfall rushing down into a mountain lake creates white spume beside the wave. To reconstruct the wonderful highlights on the waves, NOCH »Foam & Spume« has been developed. The fine material can be carefully applied with a brush on appropriate water spots. It gives rapids, cascades and waves the finishing realistic touch. »Foam & Spume« appears more natural because it is not a white colour.
How-to-tip Foam & Spume
Water structuring is the biggest challenge in model landscaping. With NOCH products you have always a professional, yet the simplest possible solution at hand.
Colour lakes, rivers and creeks with NOCH Riverbed Color Set (ref. 60875) before starting to structure the water. Your colouring should become darker from the outside to the inside, as water appears darker with increasing depth. Fix small stones and sand on the shore surface to enhance this effect.
The new NOCH Artificial Water can be filled with one cast into the lake bed. The bottle contains 500 ml. If you calculate a filling level of 10 mm, the water may be used for 500 cm². This corresponds to a surface of about 25 x 20 cm. At a filling level of 10 mm, it takes approximately 48 hours to harden. 50% of volume is lost, so the water level will be 5 mm at the end.
»Waves & Billows is a great new water product, with which you can finally form higher waves.
The material is used with a spatula from the can and applied roughly on the dried water surface. After drying for about half an hour, it is hardy enough to design a higher surge. Model wonderful waves and water forms with a toothpick or a small spatula.
The well-known NOCH Water Effects (ref. 60872) are perfect for designing (for example) waterfalls or a gently sloping and rippled water surface. The sea is never completely silent: Usually a wind or breeze moves the surface and brings “life” into the water!
The white spume often sets the crowning final of waves and rapids. NOCH »Foam & Spume« has been especially developed to recreate this great effect in model form. Apply »Foam & Spume« directly on the desired water spot with the user-friendly bottle and model it with a fine brush. A perfect finish for every water project!
| Διαθεσιμότητα | Μή Διαθέσιμο |
|---|---|
| Κατασκευαστής | NOCH |